Adbri Masonry Versawall Corner Block - Sunstone

The matching corner for Versawall, so your wall turns 90 degrees or finishes at the end with a clean face instead of a cut block.

The Versawall corner is a 390 x 215 x 200mm split-face concrete unit made to sit in the same courses as the standard Versawall block. It has a finished face on the return, which means the end of the wall and every outside corner look as good as the front.

Use it wherever the wall turns a corner or stops. It comes in left and right hand versions, and most walls need both, so count your corners and ends before you order. It stacks to the same heights as the Versawall standard block: 800mm plus cap without reinforcement, or up to 1400mm with an engineer's design and No Fines Concrete. Order your corners with the blocks and caps, because one missing corner is enough to leave a wall half built.

Features

• Left and right hand units for 90 degree corners and wall ends
• Finished face on the return, no cutting or patching
• Same 215mm depth and 200mm course height as the Versawall standard block
• Same Charcoal, Oatmeal and Sunstone colours as the standard block and cap
• Large rock face texture to match the rest of the wall

Best For Outside corners, wall ends, steps and raised garden beds built in Versawall.

Sizing Priced per block. You need one corner unit per course at every corner or exposed wall end. A wall 600mm high (3 courses) with two exposed ends needs 3 corners for each end. Not sure whether you need left or right hand? Give us a call and we will work it out with you.

Pickup and Delivery Available for pickup at our North Maclean yard or delivery across South East Queensland. If you need any help, please call us on 1300 136 895. Our team are happy to help.