Adbri Masonry Versaloc 200 Series End Block

The finished end for a Versaloc wall, so the end of every course is square and closed without cutting a standard block on site.

The Versaloc 200 Series end block is the same 400 x 190 x 200mm footprint as the standard block, with a finished end where the wall stops. That means the end of the wall is closed and neat instead of showing a cut block or open core.

Lay it at the end of each course, alternating with the half end block so the running bond stays in step. Adbri suggests gluing half end blocks to the block below with a suitable adhesive (such as a 2 part epoxy) at wall ends for extra stability. It follows the same heights as the rest of the range: 600mm plus cap without reinforcement for landscape walls, and an engineer's design for anything higher. Order your ends with the standard blocks, because a wall cannot be finished without them.

Features

• Finished end face for the stopping end of a wall
• Same 400 x 190 x 200mm size and course height as the standard block
• Alternates with the half end block to keep the bond
• Dry stack with the same lugs and tongue and groove joints
• 20MPa grey concrete

Best For The stopping ends of Versaloc retaining, garden and boundary walls.

Sizing Priced per block. At each open end of the wall you alternate an end block and a half end block course by course, so a 3 course wall end takes two of one and one of the other. Not sure of the mix for your wall? Give us a call and we will work it out with you.

Pickup and Delivery Available for pickup at our North Maclean yard or delivery across South East Queensland. If you need any help, please call us on 1300 136 895. Our team are happy to help.